Common repairs on ECM machines
The most common repairs and maintenance jobs on ECM machines, with video, a tool list and the right spare parts. Choose your machine and we will only show the parts that fit – with the position number from the exploded view.
2Choose what you need to do
Replacing the group gasket and shower screen
Show guide and parts
If coffee leaks around the portafilter, or the portafilter has to be turned well past centre to seal, the group gasket is worn. The shower screen is usually replaced at the same time.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Flat screwdriver or gasket pick
- Group brush
- Cleaning powder
- A little food-safe grease (optional)
If both 8.0 mm and 8.5 mm are listed for your machine, choose the same thickness as the gasket currently fitted. If unsure, contact us.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
Choose your machine above to see exactly which parts fit.
Must be replaced
Recommended at the same time
If needed
None of the listed parts are registered for this machine. Contact us and we will find the right part.
Backflushing and cleaning the brew group
Show guide and parts
Regular backflushing with a blind filter and cleaning powder keeps the brew group clean and extends the life of gaskets and valves.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Blind filter
- Cleaning powder
- Group brush
Follow your user manual for how often your machine should be backflushed.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
Choose your machine above to see exactly which parts fit.
Must be replaced
Recommended at the same time
If needed
None of the listed parts are registered for this machine. Contact us and we will find the right part.
Servicing the steam and hot water valve
Show guide and parts
If the steam or hot water wand drips when the valve is closed, or the valve is stiff, it needs cleaning and new seals.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Spanners
- Food-safe grease
- Descaler
The machine must be switched off, cold and depressurised. Only replace the whole valve if it is damaged.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
Choose your machine above to see exactly which parts fit.
Must be replaced
Recommended at the same time
If needed
None of the listed parts are registered for this machine. Contact us and we will find the right part.
Replacing the lever seals on the E61 group
Show guide and parts
If water leaks at the lever of the brew group, the seals around the cam shaft are worn.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Spanners
- Food-safe grease
The number of seals per machine has not yet been confirmed.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
Choose your machine above to see exactly which parts fit.
Must be replaced
If needed
None of the listed parts are registered for this machine. Contact us and we will find the right part.
Full overhaul of the E61 brew group
Show guide and parts
If the group leaks, does not drain properly after brewing or delivers uneven water flow, it can be overhauled with new valves, springs and seals.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Large spanners
- Flat screwdriver
- Pliers
- Brush
- Cleaning powder
- Food-safe grease
The parts list is preliminary and will be checked by a technician.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
Choose your machine above to see exactly which parts fit.
Must be replaced
Recommended at the same time
If needed
None of the listed parts are registered for this machine. Contact us and we will find the right part.
Vacuum valve, safety valve and boiler
Show guide and parts
Steam or water from the overflow, a safety valve releasing steam, or leaks from the boiler should be inspected by a technician. The work is done inside the machine, close to the boiler and mains power.
This should be done by a technician
We service and repair ECM machines in our shop in Kristiansand. Fill in the service form and we will get in touch.
Book a serviceParts a technician may need
Choose your machine above to see exactly which parts fit.
If needed
None of the listed parts are registered for this machine. Contact us and we will find the right part.
Adjusting the brew pressure
Show guide and parts
If the gauge consistently shows too high or too low pressure while brewing, the pressure can be adjusted. The video shows where the adjustment screw is located on your machine.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Portafilter with blind basket
- Flat-head screwdriver
Adjust in small steps and let the machine stabilise between each adjustment. If you are unsure, contact us.
The pressure is adjusted while the machine is switched on and hot. Keep hands and clothing away from hot surfaces, steam and hot water, and do not open the housing while the machine is plugged in. The videos are for guidance only, and the work is done at your own risk.
Parts for this job
No spare parts are needed for this task. Contact us if you need help.
Draining the boiler before storage or transport
Show guide and parts
If the machine is to be stored in the cold or shipped, the boiler should be drained. Water that freezes can damage the boiler, pipes and valves.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Container for water
- Towel
The water in the boiler can be very hot. Follow the safety advice in the video, and contact us if you are unsure.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
No spare parts are needed for this task. Contact us if you need help.
Installing flow control on the E61 group
Show guide and parts
Flow control lets you regulate how much water passes through the brew group while brewing, for example for longer pre-infusion. The kit is fitted on top of the E61 group, and the gauge screws into the front of the group.
Video guides
We do not have a video for this machine yet.
Tools and supplies
- Adjustable wrench
- 5 mm Allen key
- Teflon tape
- Electrical tape (protects the chrome)
Check that there are no leaks around the nut and the gauge once the machine is hot again. If you are unsure, contact us.
Switch the machine off, unplug it and let it cool down completely before you start. The videos are for guidance only, and you do the work at your own risk.
Parts for this job
Choose your machine above to see exactly which parts fit.
What you need
None of the listed parts are registered for this machine. Contact us and we will find the right part.